WHAT ARE YOU
DRIVING?

KW V1 Coilovers

Sportiness and outstanding looks. With factory-set damping.

If a car bends while driving, the slightly pressurized oil is displaced by the plunging of the piston rod. It flows through the bottom valve (pressure stage valve), which regulates the flow rate, into the outer pipe. During rebound, the oil flows from the outer tube back into the inner tube. In addition to the channels in the bottom valve, the oil also has to flow through the rebound valve located at the piston rod, to get into the piston housing.

Setup – factory-set pre-configured damping setup

The KW V1 has a vehicle-specific, fix configured damping setup with a sporty and harmonious adjustment, which allows you to experience an optimal balance of sportiness and everyday practicality. Even with full payload and maximum axle loads, the dampers always work with a sporty characteristic.

 

Our KW twin-tube dampers, which we manufacture directly in Germany, are gas-hydraulic or low-gas pressure vibration dampers. During production, we put the damper fluid or damper oil under pressure with up to five bar nitrogen. For this reason, one speaks of a low gas pressure vibration damper. This damper technology, which has also been tried and tested by KW in the aftermarket, is used as original equipment in over 90% of modern vehicles.

 

The suspension damper converts the kinetic energy of the suspension spring into thermal energy and radiates it to the environment. If a curve is driven, the KW coilover kit works in the inside of the curve of the vehicle in the rebound stage and the KW damper on the outside of the curve in the compression stage.

Continuously lowering

The KW V1 coilover kit allows a maximum or individual lowering within the tested adjustment range. Due to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the continuous lowering can be varied quickly and easily, even after years.

The benchmark for coilovers

As with all KW coilovers, the engineers at KW develop in extensive test cycles on the Nürburgring Nordschleife and in our test center on the KW 7-post rig the vehicle-specific KW damper setup estimated by car enthusiasts worldwide. So you will experience your car even more directly and dynamically with a KW coilover kit.

Vehicle-specific basic damper tuning
Assembly of the rebound valve
KW struts are made of stainless steel

After all, you do not buy just any coilover kit, but a KW coilover kit that has been especially developed and adapted for your vehicle type. KW as manufacturer exclusively uses own resources, high-quality components and the same damper technology as high-volume manufacturers. With the KW V1 coilovers, the roll and pitch movements of the vehicle body are reduced during compression, so you benefit from an unadulterated directness and a sportier handling while driving.

Our experiences for your driving pleasure

For more than 20 years, we as manufacturer have been the market leader and innovator of individual suspension solutions for the street and racing applications. No matter where in the world, sporty drivers, automobile manufacturers and refiners rely on our KW coilovers “Made in Germany”.

Vehicle-specific chassis development
Production directly in-house at KW in Fichtenberg
Every KW coilover kit is subjected to extensive load tests

Every KW coilover kit undergoes extensive stress tests during production and is developed and manufactured directly in our company headquarters in Fichtenberg in order to meet the high standards of our KW quality management. So for us as a German manufacturer, it is important that we guarantee a several-year warranty on our KW coilover kits, which exceed the original equipment manufacturer quality, as well as suspension solutions which include more than 4,600 applications.

Compare all
KW chassis

KW "inox-line"
in detail and the salt spray test

Structure and function of a KW chassis

Shopping Basket